Streamlabs OBS and Replay Buffer

1. Open the SLOBS settings, go to output, and check the box "Enable Replay Buffer"

  • Set the length to your desired time.
  • Note: Longer replay buffers require more memory.
  • For this guide we'll use 30 seconds.


2. In the general settings, check the box to Automatically start replay buffer when streaming.


3. In the Hotkey settings, set a hotkey for saving the replay buffer.

  • For this guide, we'll use Ctrl+Shift+S. 
  • Using this hotkey you can still save replays normally, even with Instant Replays setup.


4. Now, close the settings page and start the replay buffer by clicking on "Start Replay Buffer" towards the bottom right of SLOBS. 


5. Add a new source to the current scene, choose the one called "Instant Replay". 


6. Now your Instant Replay feature is ready.

  • Simply press the hotkey combination you just chose, and the last 30 seconds will play in the media source.
  • You can now resize the source and move it around.

If you have a control device such as a Stream Deck, you can create a hotkey action;

  • Set the hotkey to the same as in SLOBS, and then you have the power of instant replay at the press of a button.
Have more questions? Submit a request

0 Comments

Article is closed for comments.